chân đế máy đo lực ATTONIC KS-501H, KS-501E

Sản Phẩm

chân đế máy đo lực ATTONIC KS-501H, KS-501E
Giá : Liên hệ
MASP : KS-501H, KS-501E
Nhà sản xuất : ATTONIC
ATTONIC VERICAL TYPE KS-501H ( manual type) adn KS-501E (Motorized type ) Load measurement stand that narrows function, and made to low price slimming

Chi tiết Sản phẩm

ATTONIC LOAD STAND VERTICAL TYPE

Model:

KS-501H ( Manual vertical type)

KS-501E ( Motorized vertical type)

Load measurement stand that narrows function, and made to low price slimming

Combining acceptable model
・Push-pull tester:
AP series、MP series、MPS series（MPS-500N or less)、MPC series（MPC-500N or less）
・Digital force gauge:
ARF series（ARF-50 or less）

KS-501H(manual vertical load measurement stand):

The load measuring instrument is installed by a vertical desk-top manual operation type, and it uses it for compression and the forced duction test.

- The installation board where the load measuring instrument was installed moves up and down.

- The permissible capacity at rated load center distance is 500N(about 50kgf).

- The width of the main body is 200mm×250mm in depth ×455mm in height.

- Weight is half 9kg compared with our standard load measurement stand "K-501H".

- The lineup to externals 10kN (about 1t) types that can correspond from the resin molding goods to the inspection of metal products is being examined.

KS-501E(electric vertical load measuring stand)

- The load measuring instrument is installed by a vertical desk-top electric operation type, and it uses it for compression and the forced duction test.

- The installation board where the load measuring instrument was installed moves up and down.

- The permissible capacity at rated load center distance is 500N(about 50kgf).

- The width of the main body is 200mm×300mm in depth ×530mm in height.

- Weight is half 13kg compared with our standard load measurement stand "K-501E".

SPECIFICATIONS: