chroma Digital MultiMeter 12061

Key Features

• Datasheet
• 6½ digits resolution.
• 11 types of measurement characteristics
• DC voltage/current (1000V/3A max)
• AC voltage/current (750V/3A max)
• Resistance 2 or 4-wire ohms measurement
• Period & frequency – Diode & continuity
• Temperature (Thermocouple & RTD)
• DC voltage accuracy : 0.0015%
• AC voltage accuracy : 0.04%
• Up to 2000 readings memory storage

Chroma 12061 TOOL and Chroma 12061 LINK are two free softpanels included with

the 12061 which provide data collection and drawing for analysis.

DOWNLOAD CATALOUGE

Individual Application

Chroma’s 12061 is equipped with 11 types of measurement functions including DC voltage/current, AC voltage/current, resistance 2/4-wire ohms, period, frequency, diode, continuity, and temperature as well as a diverse set of math functions like NULL, Max/Min/Avg, High/Low limit, Percentage/Ratio/MX+B, dB/dBm, etc. Along with trigger and memory function, the Chroma 12061 is the right tool for performing basic measurements.

Test System Applications

For convenience, Chroma supports various software and hardware for different control platforms.

Chroma 12061 TOOL: This is a real-time display interface for value monitoring. It can log and output data in CSV format for analysis.

Chroma 12061 LINK: This can send the data to a PC in real time directly and save it to EXCEL or WORD format file as well as create the data pattern.

Test engineers can use ActiveX components to control the 12061 using SCPI commands.

Built-In USB (USBTMC Supported)

Different from the traditional interface, the Chroma 12061 uses USB as its standard communication interface, this not only improves the transmission speed but also makes connection easier with plug and play functionality.

The USB interface fully supports USBTMC (USB Test & Measurement Class). As long as the instrument is equipped with a USB interface that supports USBTMC, it can communicate with a PC in real time via VISA driver without the restrictions of platform and environment. USBTMC is a communications protocol built on top of the USB standard and uses GPIB-like methodology to communicate through USB. Therefore, from user’s point of view, using USB is as simple as using GPIB.

PASS/FAIL Signal Output

Chroma 12061 can provide PASS/FAIL signal to system by USB port (either communication or PASS/FAIL signal) with high/low limit set. Use a USB type B female connected to system with signal (1 floating/ 2 PSS/ 3 FAIL/ 4 GND) in 2ms low and USB interface disabled on the meter. If the result is over the high/low limit, the beeper will alarm and the signal output. (Beeper can be off)

Temperature Measurement

Chroma 12061 has temperature measurement functions that support 7 kinds of Thermocouples: E, J, K, N, R, S, and T type. It also supports RTDs 4-wire measurements. The built-in ITS-90, IEC751 and Callendar-Van Dusen temperature conversion satisfies a diverse range of measurement requirements.

Multi-Point Scanner Card

The Chroma 6½ Digital Multimeter supports a Multi-point Scanner Card, a scanning measurement tool not supported by most 6½ Digital Multimeters in the field.

The Multi-point Scanner Card offers multiplexing of ten two poles (ACV, ACI, DCV, DCI, Resistance, Period, Frequency) that can be installed on the extension card option directly off the rear panel.

Operation Speed (Individual)

Maintenance and calibration : 

► We also have calibration certificate attached ( optional )
► Please re-calibrate after use for a certain period through our purchase store. Local Vietnam : SEMIKI CORP

DISTRIBUTED BY:

Semiki instrumentation Co., Ltd
Email:  sales@semiki.com
Office tel: +84 28 2253 3522

~DOING OUR BEST FOR YOU~