chroma Low Power AC Source 61600 series

Key Features

• Datasheet
• Power:
  • 500VA (61601)
  • 1000VA (61602)
  • 1500VA (61603)
  • 2000VA (61604)
  • 4000VA (61605)
• Voltage range: 0-150V/0-300V/Auto
• Frequency: 15Hz – 1000Hz
• Compact size and weight attributable to advance PWM technology
• Built-in PFC, provide input power factor over 0.98 (full load)
• AC+DC output mode for voltage DC offset simulation
• Programmable slew rate setting for changing voltage and frequency
• Programmable voltage, current limit
• One-key recall for 9 different voltage and frequency
• Low output impedance for testing IEC 61000-3-2 ( 61605 )
• Comprehensive measurement capability, V, Irms, Ipk, Inrush, P, Q, S, PF, CF of current and etc.
• High output current crest factor, ideal for inrush current testing
• Turn on, turn off phase angle control
• TTL signal which indicates ON/OFF
• Analog programming interface
• 3 units combined to 3-phase power output
• Easy-use software for operation and ON/OFF test
• Optional GPIB and RS-232C interface
• Full protection: OP,OC,OV and OT protection

Slew Rate of Voltage & Frequency

The Chroma Programmable AC Power Source 61600 Series use DSP technology for programming voltage waveforms. Users can change the voltage or frequency in only one step, or they can set the slew rate to get a gradual increase or decrease of voltage and frequency. This can help users to easily test the power input range (for example, 90V-264V/47Hz-63Hz) of their products.

One-Key Recall Mode

The Chroma Programmable AC Power Source 61600 Series allows users to save 9 voltage and frequency combinations. Users can recall these values by pressing the “1” to “9” keys on the control panel. This can help testers or manufacture operators easily change the voltage or frequency for a variety of fixed test conditions.

Comprehensive Measurements

The Chroma Programmable AC Power Source 61600 Series has a built in 16-bit precision measurement circuit and firmware utilities to measure RMS voltage, RMS current, true power, power factor, peak repetitive current, inrush current, current crest factor, VA (apparent power), and VAR
(reactive power). These comprehensive measurements make the Chroma Programmable AC Power Source 61600 Series not only a power source
but also a highly capable power meter.

High Output Current Crest Factor & Turn On/Off Phase Angle Control

The Chroma Programmable AC Power Source 61600 Series is capable of providing high output current crest factors (Max. 6). It delivers sufficient transient power that is required for testing most rectified input type power circuits. The programmable on/off phase angle control makes the 61600 series AC source ideal for inrush current test.

DOWNLOAD CATALOGUE

Maintenance and calibration : 

► We also have calibration certificate attached ( optional )
► Please re-calibrate after use for a certain period through our purchase store. Local Vietnam : SEMIKI CORP

DISTRIBUTED BY:

Semiki instrumentation Co., Ltd
Email:  sales@semiki.com
Office tel: +84 28 2253 3522

~DOING OUR BEST FOR YOU~