máy đo điện trở bề mặt simco-ion ST-4

Sản Phẩm

máy đo điện trở bề mặt simco-ion ST-4
Giá : Liên hệ
MASP : ST-4
Nhà sản xuất : SIMCO ION
SIMCO-ION JAPAN ST-4 (Surface Resistance Tester): The low-sulfur ST-4 can be charged using a USB cable to the USB terminal of a computer. It measures about 15 hours with pre-charge and can be used up to 500 times with repeated charging.

Chi tiết Sản phẩm

SIMCO-ION Surface resistance meter

Model: ST-4

The low-sulfur ST-4 can be charged using a USB cable to the USB terminal of a computer.

It measures about 15 hours with pre-charge and can be used up to 500 times with repeated charging.

Feature

• Just put on top of the measured object, and measure the surface resistance.
• Since the portable type, it is easy to handle in the field
. Because it uses a rechargeable battery is a friendly design for the environment.
• Measurement range 10^3 to 10^13 Ω / □ (or Ω) So, can measure the resistance of various materials and products.

• Conductive mat, conductive floor, conductive bag, making it ideal for inspection, maintenance and management, such as anti-static products.
• IEC standard compliant (optional) IEC standard electrodes (contact area and weight) I compliant.

Video: how to using SIMCO-ION ST-4

Function

- Unparalleled ease. Surface resistance value can be achieved in about 15 seconds by pressing the button.
ST-4 is portable, easy operation.
- Perform the measurement of surface resistance by simply putting the object to the measured value.
- In addition, the surface and the ground leakage resistance of the conductive mat, such as putting the body can be measured.

picture: Simco-Ion ST-4 Surface Resistivity Meter at Semiki's warehouse

Specification :

Measurement range	10 ³ ~ 10 ¹³ (Ω / □ or Ω)
Measurement mode	① standard measurement mode (Ohm per square, Surface Resistivity) ② mat surface - between the mat of ground terminal resistance measurement mode (Ohms, Resistivity to Ground) The resistance measurement mode of use ③IEC standard the supplied code Method to measure in the manner of IEC standard electrodes (contact area and weight)
LCD Display	Index display (the display to one decimal place) Display battery level display of countdown of measurement time by the bar graph
LED Display	①TEST Green LED lights: standard measurement mode display (Ohm per square, Surface Resistivity) Red LED lights up: Matt - between the ground terminal resistance measurement mode (Ohms, Resistivity to Ground) And display ② measured voltage display of resistance measurement mode of the IEC standard (10V, 100V) Green LED lights: 10V output red LED lights: 100V output yellow LED lights: the end of measurement ③CHARGE Red LED lights: in the battery charge display
Measurement time	15s, 30s, 60s
Range setting	It can range setting of upper and lower limit to the measured value (Can be set to 0.5 square every)
Measurement accuracy	Index display value ± 0.5 (index) (example: 10 ^{8.5 0.5)}
Measured voltage	Automatically the voltage from the switching ①3 square sixth power: 10V, 10mA max ②6 13 square from the square: 100V, 1mA max
Power supply	The method by built-in battery
External connection terminal	① connector for an external electrode connection ②AC adapter connector (battery charging) {USB mini type}
Measurement area	50mm (electrode length) × 50mm (electrode spacing) (at the time of surface resistance measurement)
Electrode material	Special conductive rubber (volume resistivity 0.02Ω · cm MAX.)
Measurement environment	15 ℃ ~ 25 ℃, less than 60% RH
Body dimensions	114 (W) × 78 (D) × 69 (H) MAX. (Mm)
Case Material	Stainless
Weight	Body about 700g accessories code about 25g

Maintenance and calibration :

► We also have calibration certificate attached ( optional )
► Please re-calibrate after use for a certain period through our purchase store. Local Vietnam : SEMIKI CORP