Tiếng Việt 
日本語 
한국어 
TAIYO ELECTRIC Goot Wick CP Series. Sản xuất tại Nhật Bản
Bấc hàn Goot Wick CP Series No-clean không chứa halogen
TAIYO Nhật Bản Goot Wick CP Series Dây cách điện WICK Không sạch, không chứa halogen
Sử dụng từ thông ‘không halogen’ Có thể chọn chiều rộng phù hợp từ 1,5 mm đến 3.5 mm cho công việc của bạn. Có sẵn cuộn 1,5 m và cuộn 30 m
CP-1015 : 1.0mm x 1.5 m
CP-1515 : 1.5mm x 1.5 m
CP-2015 : 2.0mm x 1.5 m
CP-3015 : 3.0mm x 1.5 m
CP-3515 : 3.5mm x 1.5 m
Fulx Type: Not Clean
Fulx Classification: ROL0 (IPC J-STD-004C)
Halogen content [% mass]: 0.00%
Copper corrosion test: PASS (JIS Z 3197)
Corrosion test with copper mirror: No mirror penetration (IPC-TM-650)
Insulation resistance test: 1×108 Ω or higher (JIS Z 3197)
Kiểm tra khả năng chịu điện áp và độ ẩm: Không di chuyển ion (JIS Z 3197).
TAIYO Goot CP Series LEAD-FREE DESOLDERING
Our thin and soft desoldering wire’s flat braid has efficient thermal transmission. Removes solder faster with better heat response than previous wicks. Recommended for lead-free solder with high heating load.
RMA base flux.
High-quality desoldering wick with braided copper wire, saturated with non-chlorine special flux. Can be used for precision PCBs safely.
TAIYO Goot CP Series I How to use
Adopting 'Halogen-free' flux Eco-friendly
Model:
CP-1015 : 1.0mm x 1.5 m
CP-1515 : 1.5mm x 1.5 m
CP-2015 : 2.0mm x 1.5 m
CP-3015 : 3.0mm x 1.5 m
CP-3515 : 3.5mm x 1.5 m
Fulx type: No clean
Fulx classification: ROL0 (IPC J-STD-004C)
Halide content [mass%]: 0.00%
Copper corrosion test: PASS (JIS Z 3197)
Corrosion test with copper mirror : No evidence of mirror briskness (IPC-TM-650)
Insulation resistance test : 1×108 Ω or Higher（JIS Z 3197）
Voltage withstand humidity test: No Ion Migration (JIS Z 3197)
Pic.: TAIYO Electric Japan Goot wick CP-2515 ( 2.5mm x 1.5m ) at Semiki’s warehouse
Usage/Applications
Desoldering wire is used to remove solder from an elemental device or from patterns on a printed circuit board (PCB) from which surface-mounted devices such as BGA (ball grid array) have been removed.
Place the desoldering wire on where you want to desolder, and put a soldering iron on top to melt a solder joint.
DISTRIBUTED BY:
Semiki instrumentation Co., Ltd
Email: sales@semiki.com
Office tel: +84 979761016
~DOING OUR BEST FOR YOU~
