Product portfolio

SEMIKI measurement solution

SoC test system Vision Camera System PCB function tester Chip loading machine Repair measuring equipment

Electronic industry measuring machine

Multi-channel data logger Standard AC/DC programmable power supply High voltage meter Insulation resistance tester Ground resistance meter Leakage current meter ESD measuring device Electrical characteristics analysis equipment Production room equipment

Force and mechanical measuring equipment

Force measuring device clamp set Force sensor Force measuring base Torque wrench Force measuring system Decibel Material thickness gauge Vibration meter Gas meter Mechanical force gauge Electronic force gauge Torque measuring machine Speed machine Device for measuring material hardness Power screwdriver

Measuring equipment for mechanical industry

Standard measuring tools Thread check conditioner Profile measuring machine Coating thickness gauge Quality testing machine Magnetic measuring device Altitude measure

Temperature and humidity measuring device

Temperature and humidity meter Substance concentration measuring device Detachable probe thermometer Infrared thermometer, thermal camera Self-recording thermometer

Optical measuring equipment

Industrial cameras Measurement microscope Digital microscope Stereo microscope Beam intensity meter Colorimeter Endoscopy equipment

Lab equipment

Industrial scales Desktop scale Technical scales Analytical balance Industrial floor scales Hanna experimental measuring equipment Clean room equipment Spectroscopy and X-Ray equipment Simulation cabinets, drying cabinets, furnaces

ASKER MD-1 CAPA plastic elastomer hardness measuring device shore A,C

Producer: ASKER KOBUNSHI

Category: Plastic and rubber hardness tester Tag: digital durometer

ASKER Micro MD-1 hardness tester High precision measurement of micro-sized specimens with simple operation. Hardness tester for thin and small specimens of various rubbers, thermoplastic elastomers, non-hardening plastics. Unlike conventional hardness testers, this one allows direct measurement of hardness of objects with higher reproducibility.
Probe design (mm)
Type A···0.50H Φ0.16 Cylindrical
Type C···0.50H Φ1.00 Hemispherical
Pressure foot size (mm)
Type A···Outer diameter: 4.0 Inner diameter: 1.5
Type C···Outer diameter: 9.0, Inner diameter 2.0
Intended sample type for type A/type C measurement: O-rings/Packaging materials/Rubber sheets/Precision rubber parts/Rolls/Belts/Hose

KOBUNSHI KEIKI Japan

ASKER Micro durometer MD-1 capa

ASKER Micro durometer MD-1 capa High-precision measurement of micro-sized specimens with a simple operation.
A hardness tester for thin and small specimens of various rubbers, thermoplastic elastomers, nonrigid plastics. Unlike conventional durometers, it enables direct measurement of the hardness of objects with higher reproducibility.

Features

Type

Type A for general rubbers and Type C for soft rubbers

O-rings/Packings/Rubber sheets/Precision rubber parts/Rolls/Belts/Hoses

Measurement time

About a minimum of 3 seconds for one automatic measurement cycle.

Measurement objects

Capable of measuring the hardness of small rubber parts including those for automobiles, electronic circuits, office machines in the product shape instead of conventionally used test pieces. Selection of three modes, [PEAK HOLD], [TIMER HOLD], or [NORMAL] as standard.

The timer can be set by the second to a maximum of 15 seconds.

Accessories

Connectable to PC via Ethernet or RS-232C interface.

Equipped with application software for measurement.

Application software for measurement

Starting and finishingf measurement
Measurement of peak value and timer-hold value
Measurement of the decrement of hardness values (every 100msec)
Data can be easily exported to Excel.
Data saved in csv format.

Specifications

Realizes hardness measurement of the part itself
Compared to the IRHD micro method, the measurement time is extremely short, so it can dramatically reduce the time required when large-volume measurements are required, such as “micro hardness distribution measurement of product cross sections” performed for evaluating the deterioration of rubber parts .
In addition, by using the measurement application software, it is possible to analyze the creep characteristics of the sample by monitoring the hardness in real time every 0.1 seconds for up to 60 seconds from the start of the measurement of the sample.
It has been adopted by many domestic automobile parts manufacturers and office equipment manufacturers for new product development and quality control, and has a proven track record in various fields.

Pic.: ASKER Micro durometer MD-1 capa ( Intended specimen typeO-rings/Packings/Rubber sheets/Precision rubber parts/Rolls/Belts/Hoses) at Semiki's warehouse

Maintenance and calibration :

► We also have calibration certificate attached ( optional )

► Please re-calibrate after use for a certain period through our purchase store.

Local Vietnam : SEMIKI Ins