KYOWA Nhật Bản
Model: CDA-900A-/ CDA-900A
DC-CDV-900A/ CDV-900A-DC
CDA/CDV-900A là Bộ điều hòa tín hiệu có dải tần số đáp ứng rộng từ DC đến 500 kHz và độ phi tuyến tính tuyệt vời trong phạm vi ±0,01%FS. Cài đặt đơn giản giúp cải thiện đáng kể hiệu quả công việc.
Độ nhạy cao (Lên đến 10000 lần). Phản hồi nhanh (DC đến 500 kHz). Kiểm tra khoảng cách xa: (CDA-900A có thể đo tới 2 km). Độ phi tuyến tính tuyệt vời (Trong phạm vi ±0,01%FS. Nguồn điện phổ thông (100 đến 240 VAC hoặc 10,5 đến 15 VDC)
Phụ kiện tiêu chuẩn
Cáp đầu ra U-08, U-59, Cáp nguồn AC P-25 (Với phích cắm chuyển đổi 2 chân CM-52, chỉ dành cho CDV/CDA-900A), Cáp nguồn DC P-69 (chỉ dành cho CDV/CDA-900A-DC), Lõi Ferrite × 5 (chỉ dành cho CDV/CDA-900A-DC), Sách hướng dẫn sử dụng
The CDV-900A, CDA-900A is a Signal Conditioner which features wide frequency response range from DC to 500 kHz, and excellent nonlinearity within ±0.01%FS. Simple setting enables improvement of work efficiency greatly.
モデル：
· High sensitivity (Up to 10000 times)
· Fast response (DC to 500 kHz)
· Long-distance testing (CDA-900A can measure up to 2 km)
· Excellent nonlinearity (Within ±0.01%FS)
· Universal power supply (100 to 240 VAC or 10.5 to 15 VDC)
標準付属品
Output cable U-08, U-59, AC power cable P-25 (With 2-pin conversion plug CM-52, CDV/ CDA-900A only), DC power cable P-69 (CDV/CDA-900A-DC only), Ferrite core × 5 (CDV/CDA-900A-DC only), Instruction manual
オプションのアクセサリ
Input cable U-37, Extension cables N-81 to N-85, Housing case YC-A, Amplifier stand FA-1B, AC adapter SA-10A-AMP (CDV/CDA-900A-DC only)
Easy setting: Just set input strain and output voltage at the time.
Light weight: Approximately 30% lighter than the conventional signal conditioner. Monitor and bar graph meter are standard provision. Not only static strain but also dynamic strain signal can be monitored.
Low noise: Reduce noise by 30% than the conventional product.
DC amplifier function provided: Capable of 10,000 amplifications as a DC amplifier
TEDS*1 function: When using strain gage transducer with built-in TEDS circuit, the internal gain can be easily set without referring the Test Data Sheet by pressing the TEDS switch. TEDS-compatible sensors and remote-sensing sensors. Capable of using both TEDS-compatible sensors and remote-sensing sensors by using the TEDS- sensor/remote–sensing sensor detection function.
ACTL LOAD function: The internal gain can be set with the actual load or external calibrator by pressing the ACTL LOAD switch.
Bridge resistance check function: This function checks breaking of wires in the strain gage bridge, and the monitor indicates which wires are broken.
Confirming the CE marking: The CDV/CDA-900A-DC conforms to the EMC Directive (applicable standard: EN61326-1).
This section describes a general system configuration when using the CDV/CDA-900A-DC for measurement.
メンテナンスと校正:
► 校正証明書も添付しております（オプション）
► 一定期間ご使用後は、弊社購入店にて再校正を行ってください。
配布元:
セミキ計装株式会社
電子メール: sales@semiki.com
オフィス電話: +84 28 2253 3522
～あなたのために最善を尽くします～
電気特性解析装置
電気特性解析装置
電気特性解析装置
電気特性解析装置
電気特性解析装置
電気特性解析装置
電気特性解析装置
電気特性解析装置
