Vietnamese 
Japanese 
English 
Korean 
3R Solution Ống nội soi 3R-BS27,40,60,80
Model:
3R-BS27-175 (Φ2.7mm/ Chiều dài 175mm)
3R-BS40-175 (Φ4.0mm/ Chiều dài 175mm)
3R-BS60-179 (Φ6.0mm/ Chiều dài 179mm)
3R-BS80-179 (Φ8.0mm/ Chiều dài 179mm)
Ống nội soi (ống nội soi cứng) này có sẵn ở chế độ nhìn trực tiếp hoặc nhìn ngang với đường kính Φ2.7mm, Φ4.0mm, Φ6.0mm hoặc Φ8.0mm và chiều dài hiệu dụng từ 175mm đến 179mm.
Có thể sử dụng để kiểm tra không phá hủy các không gian hẹp mà mắt thường không thể nhìn thấy trực tiếp, cũng như bên trong thiết bị và các bộ phận. Việc quan sát có thể được thực hiện bằng mắt thường hoặc trên màn hình (với các phụ kiện tùy chọn). *Nguồn sáng được bán riêng.
Ống nội soi siêu mỏng đảm bảo không bỏ sót bất kỳ khuyết tật bên trong nào.
3R-BS27,40,60,80 (Φ2.7mm, Φ4.0mm, Φ6.0mm, Φ8.0mm ) borescope.
This borescope (rigid endoscope) is available in either direct or side view with diameters of Φ2.7mm, Φ4.0mm, Φ6.0mm, or Φ8.0mm and an effective length of 175mm to 179mm. It
can be used for non-destructive inspection of narrow spaces that cannot be reached directly by the eye, as well as the inside of equipment and parts. Observation can be done visually or on a monitor screen (with optional accessories). *Light source sold separately.
Non-destructive inspection of narrow spaces with an outer diameter of Φ2.7mm to Φ8.0mm
If scratches or defects inside parts or equipment that cannot be seen directly are left as they are, it could lead to serious accidents or damage.Borescopes enable non-destructive testing of various places that could not be seen directly before, such as narrow interiors, gaps, and holes.
Non-destructive inspection of areas that cannot be seen directly
Ultra-thin borescope ensures no internal defects are overlooked
If scratches or defects inside parts or equipment that cannot be seen directly are left unattended, it could lead to serious accidents or damage.This borescope can perform non-destructive testing of various places that could not be seen directly before, such as the inside, gaps, and holes.
Inspection can be performed in the optimal viewing direction depending on the object.
You can choose between direct vision and side vision.
When observing the inside of a narrow part or hole, if you want to see the whole picture, you can use a borescope with a direct view at the tip, but since it is difficult to see the sides, a side view is recommended.
Can be displayed on a computer monitor using optional accessories
By attaching a separately sold C-mount camera to the borescope, the internal state can be displayed on a computer monitor in high resolution of 5 megapixels. The large screen makes it ideal for multiple people to check the image at the same time. In addition, since there is no need to look through the eyepiece, the burden of the work can be reduced.
► We also have calibration certificate attached ( optional )
► Please re-calibrate after use for a certain period through our purchase store.
DISTRIBUTED BY:
Semiki instrumentation Co., Ltd
Email: sales@semiki.com
Office tel: +84 28 2253 3522
~DOING OUR BEST FOR YOU~
