Cần hỗ trợ xin liên hệ zalo 0979.761.016
Semiki Logo
259.887.750  12

Giỏ hàng

Home / Cửa Hàng / Thiết bị đo nhiệt độ, độ ẩm / Máy đo nhiệt độ,độ ẩm / KETT Paper Moisture Tester KH-70 thiết bị đo độ ẩm giấy, hộp carton

KETT Paper Moisture Tester KH-70 thiết bị đo độ ẩm giấy, hộp carton

Nhà sản xuất:

Máy kiểm tra độ ẩm giấy KETT KH-70 (0-33%) .Máy đo độ ẩm giấy KH-70 được tải sẵn dữ liệu đường cong hiệu chuẩn cho nhiều loại giấy khác nhau, do đó, bằng cách gọi dữ liệu này, bạn có thể dễ dàng đo độ ẩm của nhiều loại giấy khác nhau. Bạn cũng có thể tạo đường cong hiệu chuẩn của riêng mình và tùy chỉnh. Cảm biến có hình lò xo, đảm bảo độ bám dính tốt vào giấy và cho phép đo ổn định. Đây là loại nhỏ, nhẹ, tiện dụng, có thể dễ dàng sử dụng trên dây chuyền sản xuất của nhà máy và trong các phòng kiểm tra.

(Giá trên đã bao gồm thuế VAT 10%)
ĐỀN TIỀN GẤP 10 LẦN
Nếu phát hiện hàng nhái
MIỄN PHÍ GIAO HÀNG
Nhận hàng trong 24-72h
BẢO HÀNH 12 THÁNG
Với mọi sản phẩm
HỒ TRỢ 24/7 QUA ZALO
Tìm số zalo 0979761016

Mô tả

Kett Japan

 

Paper Moisture Tester

Model: KH-70

 

Easy to operate.

When you press the sensor against the paper to be measured, the moisture content is displayed.

Paper moisture can be measured non-destructively.

Sheets and rolls of paper can also be measured as they are.

You can select from four types of cardboard, two types of board paper, five types of general paper, and one user calibration curve.

The selection key allows you to call up standard pre-installed calibration curves for cardboard, kraft paper, etc.

Average moisture content can be measured up to a depth of 50 mm.

For more accurate moisture measurement , the average moisture content is measured not only on the surface but also up to a depth of 50 mm. The paper to be measured should be stacked to a thickness of 50 mm or more. Stack the samples to a depth of at least 50 mm, and ensure that there is as little air as possible between the samples. If the samples cannot be stacked more than 50 mm thick, place them on a polystyrene foam underlay. However, even in this case, the sample must be at least 20mm thick, and the total thickness of the sample and the underlay must be at least 50mm.

Kett KH-70 Paper Moisture Tester

  • High Frequency dielectric constant
  • Range 0 to 30% (Paper), 0 to 175% (Cardboard)
  • Resolution 0.1%
  • Accuracy ± 2%
  • LCD Display
  • Function Alarm
  • Battery Alkaline 9V x 1
  • Dimension 150 x 72 x 85mm (150g)
Approx. 40° Angle to material Paper Cardboard
  • P1 Filter paper, Tissue paper
  • P2 Semi-chemical pulp, crepe paper, Test liner
  • P3 Packaging paper, Fluting paper, 80 g/sqm
  • P4 Kraft paper
  • P5 Offset paper
  • P6 Customer-specified calibration curves
C1   Cardboard 3.6mm 2 Sheets   3.6mm 2 Sheets 

C2   Cardboard 6.5mm 3 Sheets   6.5mm 3 Sheets

C3   Cardboard 2.8mm 3 Sheets   2.8mm 3 Sheets

C4   Cardboard 1.5mm 6 Sheets   1.5mm 6 Sheets

C5   Cardboard 1.0mm 3 Sheets   1.0mm 3 Sheets

C5   Cardboard 2.0mm 6 Sheets   2.0mm 6 Sheets

 

Pic.:Paper Moisture Tester KETT KH-70 ( 0-33%) at Semiki’s warehouse

 

Specifications 

Danh mục sản phẩm
Có thể bạn sẽ thích
Sản phẩm tương tự
Thương hiệu nổi bật

Sản phẩm đã xem (chưa đúng query)

© 2024 Semiki inc. All rights reserved.

Yêu cầu SEMIKI báo giá

Hoàn thành biểu mẫu dưới đây để nhận báo giá từ SEMIKI.
Bạn cần nhập đủ tất cả các trường thông tin bên dưới.