Product portfolio

SEMIKI measurement solution

SoC test system Vision Camera System PCB function tester Chip loading machine Repair measuring equipment

Electronic industry measuring machine

Multi-channel data logger Standard AC/DC programmable power supply High voltage meter Insulation resistance tester Ground resistance meter Leakage current meter ESD measuring device Electrical characteristics analysis equipment Production room equipment

Force and mechanical measuring equipment

Force measuring device clamp set Force sensor Force measuring base Torque wrench Force measuring system Decibel Material thickness gauge Vibration meter Gas meter Mechanical force gauge Electronic force gauge Torque measuring machine Speed machine Device for measuring material hardness Power screwdriver

Measuring equipment for mechanical industry

Standard measuring tools Thread check conditioner Profile measuring machine Coating thickness gauge Quality testing machine Magnetic measuring device Altitude measure

Temperature and humidity measuring device

Temperature and humidity meter Substance concentration measuring device Detachable probe thermometer Infrared thermometer, thermal camera Self-recording thermometer

Optical measuring equipment

Industrial cameras Measurement microscope Digital microscope Stereo microscope Beam intensity meter Colorimeter Endoscopy equipment

Lab equipment

Industrial scales Desktop scale Technical scales Analytical balance Industrial floor scales Hanna experimental measuring equipment Clean room equipment Spectroscopy and X-Ray equipment Simulation cabinets, drying cabinets, furnaces

KYOWA CDA-900A, CDA-900A-DC bộ ghi nhận tín hiệu strain gauge (120, 350 Ω)

Producer: KYOWA

KYOWA CDA-900A, CDA-900A-DC bộ ghi nhận tín hiệu strain gauge (120, 350 Ω)

KYOWA CDA-900A, CDA-900A-DC bộ ghi nhận tín hiệu strain gauge (120, 350 Ω) - Image 2

KYOWA CDA-900A, CDA-900A-DC bộ ghi nhận tín hiệu strain gauge (120, 350 Ω) - Image 3

KYOWA Nhật Bản
Model: CDA-900A-/ CDA-900A
DC-CDV-900A/ CDV-900A-DC
CDA/CDV-900A là Bộ điều hòa tín hiệu có dải tần số đáp ứng rộng từ DC đến 500 kHz và độ phi tuyến tính tuyệt vời trong phạm vi ±0,01%FS. Cài đặt đơn giản giúp cải thiện đáng kể hiệu quả công việc.
Độ nhạy cao (Lên đến 10000 lần). Phản hồi nhanh (DC đến 500 kHz). Kiểm tra khoảng cách xa: (CDA-900A có thể đo tới 2 km). Độ phi tuyến tính tuyệt vời (Trong phạm vi ±0,01%FS. Nguồn điện phổ thông (100 đến 240 VAC hoặc 10,5 đến 15 VDC)
Phụ kiện tiêu chuẩn
Cáp đầu ra U-08, U-59, Cáp nguồn AC P-25 (Với phích cắm chuyển đổi 2 chân CM-52, chỉ dành cho CDV/CDA-900A), Cáp nguồn DC P-69 (chỉ dành cho CDV/CDA-900A-DC), Lõi Ferrite × 5 (chỉ dành cho CDV/CDA-900A-DC), Sách hướng dẫn sử dụng

KYOWA ELECTRONIC INSTRUMENTS

Signal Conditioner

CDA/CDV-900A

The CDV-900A, CDA-900A is a Signal Conditioner which features wide frequency response range from DC to 500 kHz, and excellent nonlinearity within ±0.01%FS. Simple setting enables improvement of work efficiency greatly.

Model:

CDA-900A/ CDA-900A-DC

CDV-900A/ CDV-900A-DC

· High sensitivity (Up to 10000 times)

· Fast response (DC to 500 kHz)

· Long-distance testing (CDA-900A can measure up to 2 km)

· Excellent nonlinearity (Within ±0.01%FS)

· Universal power supply (100 to 240 VAC or 10.5 to 15 VDC)

Specification

Standard Accessories
Output cable U-08, U-59, AC power cable P-25 (With 2-pin conversion plug CM-52, CDV/ CDA-900A only), DC power cable P-69 (CDV/CDA-900A-DC only), Ferrite core × 5 (CDV/CDA-900A-DC only), Instruction manual

Optional Accessories
Input cable U-37, Extension cables N-81 to N-85, Housing case YC-A, Amplifier stand FA-1B, AC adapter SA-10A-AMP (CDV/CDA-900A-DC only)

Features

Easy setting: Just set input strain and output voltage at the time.

Light weight: Approximately 30% lighter than the conventional signal conditioner. Monitor and bar graph meter are standard provision. Not only static strain but also dynamic strain signal can be monitored.

Low noise: Reduce noise by 30% than the conventional product.

DC amplifier function provided: Capable of 10,000 amplifications as a DC amplifier

TEDS*1 function: When using strain gage transducer with built-in TEDS circuit, the internal gain can be easily set without referring the Test Data Sheet by pressing the TEDS switch. TEDS-compatible sensors and remote-sensing sensors. Capable of using both TEDS-compatible sensors and remote-sensing sensors by using the TEDS- sensor/remote–sensing sensor detection function.

ACTL LOAD function: The internal gain can be set with the actual load or external calibrator by pressing the ACTL LOAD switch.

Bridge resistance check function: This function checks breaking of wires in the strain gage bridge, and the monitor indicates which wires are broken.

Confirming the CE marking: The CDV/CDA-900A-DC conforms to the EMC Directive (applicable standard: EN61326-1).