Nuvoton Panasonic PanaX EX2 PX-PAC-X2IU4-0N5 (KU-X2IU) isolated with supports the remote control.
Nuvoton Panasonic PanaX EX2 PX-PAC-X2IU4-0N5 (KU-X2IU) có cách ly hỗ trợ điều khiển từ xa
Cung cấp môi trường gỡ lỗi và lập trình flash tích hợp dưới dạng một thiết bị duy nhất. Lập trình flash hỗ trợ ghi dữ liệu sản xuất hàng loạt.
Mang lại hoạt động tốc độ cao mặc dù chi phí thấp
(phản hồi gỡ lỗi, lập trình flash).
Hỗ trợ các dòng MN101C, MN101E, MN101L, MN103L, MN103S và MN103H.
Bao gồm trình gỡ lỗi (DebugFactory Builder) và phần mềm lập trình cho các sản phẩm máy vi tính Panasonic.
Được cấp phép sử dụng không hạn chế (có thể hỗ trợ các sản phẩm mới với phần mềm cập nhật).
Dòng sản phẩm bốn model đáp ứng đầy đủ nhu cầu của khách hàng.
Chức năng/chi phí EX2 Model độc lập (hỗ trợ lập trình độc lập mà không cần máy tính chủ)
Phương thức kết nối đích: Model tiêu chuẩn Kết nối thông thường với đích. Model cách ly Kết nối cách ly về điện với đích. Các loại kết nối mục tiêu bao gồm đầu nối hộp 14 và 10 chân và cáp mềm nhỏ gọn (người dùng có thể lựa chọn).
Panasonic Corporation, based in Osaka, Japan, recently confirmed that it has completed the previously announced transfer of its semiconductor business to Nuvoton Technology Corporation, a Taiwan-based semiconductor company under the umbrella of Winbond Electronics Corporation group, following the receipt of regulatory approvals.
Feature of PanaX EX2 programming system
The Programming system is the standalone programming environment to the microcomputer with non-volatile memory. This system is used in combination with the programmer socket board, programmer board, and the PanaX EX series or the PanaX SP.
Pic.: NUVOTON Panasonic PX-PAC-X2IU4-0N5 (KU-X2IU) PanaX EX2 On-board debugging and programming environment isolated mode with supports the remote control at Semiki’s warehouse
► Product summary
• This system consists of the programmer board, the programmer socket board, and the PanaX EX series or the PanaX SP. The programmer board is constructed by the common circuit for each microcomputer. The programmer socket board is constructed by the specific circuit for each microcomputer.
• This system performs the programming of the microcomputer with non-volatile memory by the serial communication between the PanaX EX series or the PanaX SP and the microcomputer.
• The PanaX EX series or the PanaX SP and the host computer is connected by USB cable. The programmer board and the programmer socket board do not require a power supply.
• In addition, this system can be programmed to the build-in non-volatile memory without a connection to the host computer. At that time, it is necessary that the program data to the memory is registered to the PanaX EX2 or PanaX SP beforehand.
• When the PanaX EX2 or the PanaX SP is not connected to the host computer, power is supplied from the AC adapter.
• The PanaX EX Series or the PanaX SP supports the gang programming by USB connection to multiple units.
• The gang programming can be controlled from another equipment that is not a host computer.
• This programming can not be used in a mix of the PanaX EX Series and the PanaX SP.
PanaX EX2 On-board debugger package has Standard IO models and Isolated IO models.
PanaX EX2 is preparing for a package containing AC adapter. Before, we sale only DWire 10 pin cable set, but we sale DWire 14 pin cable set. All packages include a USB cable.
* When using remote control function, the PanaX EX2 is required that supports the remote control.
* If you want the PanaX EX2 supports the remote control function, specify option at the time of purchase. If you want to add the remote control function to the PanaX EX2 already purchased, contact us via the Semiconductor Support system (Refer to “Support” on this manual).
Pic.: Nuvoton Panasonic PanaX EX2 PX-PAC-X2NU4-0N5 (KU-X2NU4R) with supports the remote control at Semiki’s warehouse
Provides an on-board debugging and flash programmingenvironment in the form of a single device. Flash programming supports mass-production writing.
Delivers high-speed operation despite low cost
(debugger response, flash programming).
Supports the MN101C, MN101E, MN101L, MN103L, MN103S, and MN103H series.
Includes debugger (DebugFactory Builder) and programmer software for Panasonic microcomputers products.
Licensed for unrestricted use (can support new products with updated software).
Four-model lineup meets the full range of customer needs.
Function/cost
EX1 Inexpensive model
(used via continuous connection with host PC)
EX2 Standalone model
(supports standalone programming without a host PC)
Target connection methods
Standard model Normal connection with target
Isolated model Electrically isolated connection with target
Target connection types include 14- and 10-pin box connectors and compact flexible cables (user-selectable).
► We also have calibration certificate attached ( optional )
► Please re-calibrate after use for a certain period through our purchase store.
DISTRIBUTED BY:
Semiki instrumentation Co., Ltd
Email: sales@semiki.com
Office tel: +84 28 2253 3522
Máy nạp chip
Máy nạp chip
Máy nạp chip
Máy nạp chip
Máy nạp chip
Máy nạp chip
Máy nạp chip
Máy nạp chip