Semiki logo
HOTLINE: +84 979761016
0

Cart

No products in the cart.

Continue shopping
Home / Shop / Measuring equipment for mechanical industry / Standard measuring tools / mitutoyo 950-317 electronic level Level 360° flatness measurement
Product portfolio

mitutoyo 950-317 electronic level Level 360° flatness measurement

Producer:

Mitutoyo 360° Precision Digital Level
Model: 950-317
Scope: 360° (4 x 90°)
Maximum allowable error (degrees): Horizontal: 0.1
Vertical: 0.2
Repeatability (degrees): 0.1
Power source: Standard battery (9 V) 6LR61
Battery life: Approximately 500 hours
Sensitivity (degrees): 0.1
Mitutoyo 360° Digital Level, No Data Output 950-317 in Semiki stock, angle gauge/level designed to measure angles on a vertical plane. The device can be zeroed at any angular position and directly indicates the angle between the material and that position when used with a resolution of 0.1 degrees. When zeroed horizontally, measurements are provided in the same way as a level, but with the advantage of extending the range to the vertical.

Mitutoyo Japan 

Digital Precision Level 360°
Model: 950-317 

A digital Mitutoyo Digital Precision Level 360°, without Data Output 950-317

protractor/level designed for making angle measurements in the vertical plane. The instrument can be zeroed at any angular position and directly indicates the angle between the stock and that position when in use to a resolution of 0.1 degree. When zeroed at the horizontal, readings are provided in the same manner as a spirit level, but with the advantage of a range extending all the way to the vertical.

Model: 950-317
Range: 360° (4 x 90°)
Max. permissible error (degrees): Horizontal : 0.1
Vertical : 0.2
Repeatability(degrees): 0.1
Power supply: Standard battery (9 V) 6LR61
Battery life: Approx. 500 hours
Sensitivity(degrees): 0.1

Mitutoyo Digital Precision Level 360°, without Data Output 950-317 at Semiki's warehouse

Mitutoyo 950-317 electronic inclinometer can measure all angles in a wide range from 0 to 360 degrees. With a small division of only ±0.1° combined with an error level of only ±0.1° within ±10°, the largest ±0.2° is used to measure tilt angle values, measure flatness, straightness, balance equipment, and set up fixtures.

Maintenance and calibration : 

► We also have calibration certificate attached ( optional )

► Please re-calibrate after use for a certain period through our purchase store.

Local Vietnam : SEMIKI Ins

DISTRIBUTED BY:

Semiki instrumentation Co., Ltd

Email: sales@semiki.com

Office tel: +84 28 2253 3522

~DOING OUR BEST FOR YOU~

 

Request a quote
SEMIKI MEASUREMENT EQUIPMENT COMPANY LIMITED
Headquarters:
  • Tầng 12 – tháp A2, Tòa nhà Viettel, 285 Cách Mạng Tháng Tám, phường Hoà Hưng, TP. HCM
  • Sales@semiki.com
  • +84 979761016
  • Tax code 0313928935
Warranty, maintenance and repair center:
  • Tầng 7, Tòa nhà VNO, 129 Điện Biên Phủ, phường Gia Định, TP. HCM
Representative office in Hanoi:
  • Tầng 9 Tòa nhà 3D, Số 3 Phố Duy Tân, phường Cầu Giấy, TP. Hà Nội
© 2024 Semiki inc. All rights reserved.

Ask SEMIKI for a quote

Complete the form below to receive a quote from SEMIKI.
You need to enter all information fields below.