Product portfolio

SEMIKI measurement solution

SoC test system Vision Camera System PCB function tester Chip loading machine Repair measuring equipment

Electronic industry measuring machine

Multi-channel data logger Standard AC/DC programmable power supply High voltage meter Insulation resistance tester Ground resistance meter Leakage current meter ESD measuring device Electrical characteristics analysis equipment Production room equipment

Force and mechanical measuring equipment

Force measuring device clamp set Force sensor Force measuring base Torque wrench Force measuring system Decibel Material thickness gauge Vibration meter Gas meter Mechanical force gauge Electronic force gauge Torque measuring machine Speed machine Device for measuring material hardness Power screwdriver

Measuring equipment for mechanical industry

Standard measuring tools Thread check conditioner Profile measuring machine Coating thickness gauge Quality testing machine Magnetic measuring device Altitude measure

Temperature and humidity measuring device

Temperature and humidity meter Substance concentration measuring device Detachable probe thermometer Infrared thermometer, thermal camera Self-recording thermometer

Optical measuring equipment

Industrial cameras Measurement microscope Digital microscope Stereo microscope Beam intensity meter Colorimeter Endoscopy equipment

Lab equipment

Industrial scales Desktop scale Technical scales Analytical balance Industrial floor scales Hanna experimental measuring equipment Clean room equipment Spectroscopy and X-Ray equipment Simulation cabinets, drying cabinets, furnaces

“Cedar WDI Series screwdriver and wrench force testing device” has been added to your cart. View cart

CEDAR WDISR-IP series thiết bị kiểm định lực mô men xoắn tua vít, cờ lê (50gf~150kgf)

Producer: CEDAR SUGISAKI

CEDAR WDISR-IP series thiết bị kiểm định lực mô men xoắn tua vít, cờ lê (50gf~150kgf)

CEDAR WDISR-IP series thiết bị kiểm định lực mô men xoắn tua vít, cờ lê (50gf~150kgf) - Image 2

CEDAR WDISR-IP series thiết bị kiểm định lực mô men xoắn tua vít, cờ lê (50gf~150kgf) - Image 3

CEDAR WDISR-IP series thiết bị kiểm định lực mô men xoắn tua vít, cờ lê (50gf~150kgf) - Image 4

SUGASAKI Meter CEDAR WDISR-IP Series (Sản xuất tại Nhật Bản)
Quản lý công cụ mô-men xoắn thủ công / loại pin tích hợp đã trở nên dễ sử dụng hơn và có hiệu suất cao hơn.
WDISR-IP05 (2,0 ~ 500,0 [mN-m])
WDISR-IP5 (0,020 ~ 5,000 [N-m])
WDISR-IP50 (0,20 ~ 50,00 [N-m])
WDISR-IP200 (2,0 ~ 200,0 [N-m])
WDISR-IP500 (2,0 ~ 500,0 [N-m])
WDISR-IP1500 (20 ~ 1500 [N-m])
Nó hoạt động với máy tính cá nhân hoặc PLC để quản lý phép đo mô-men xoắn cao hơn. Để quản lý các trình điều khiển mô-men xoắn thủ công và cờ lê.
Màn hình màu có thể hiển thị nhiều thông tin khác nhau.
Đầu ra dữ liệu là thiết bị tiêu chuẩn cho cả USB và RS232C.
Một loạt các dòng sản phẩm đa dạng từ 500mN・m (0,5N・m) đến 1500N・m. Các giá trị số như điều kiện đạt/không đạt có thể được thiết lập lên đến 10 kênh. Phán đoán đạt/không đạt được hiển thị rõ ràng bằng màu sắc. Ổ đĩa pin tích hợp.

SUGISAKI Meter Japan

Separate type digital torque driver

Model:

WDISR-IP05 (2.0 ~ 500.0 [mN-m])
WDISR-IP5 (0.020 ~ 5.000 [N-m])
WDISR-IP50 (0.20 ~ 50.00 [N-m])
WDISR-IP200 (2.0 ~ 200.0 [N-m])
WDISR-IP500 (2.0 ~ 500.0 [N-m])
WDISR-IP1500 (20 ~ 1500 [N-m])

For managing various manual torque drivers and wrenches
Manual torque tool management / built-in battery type The “DIS series” has become easier to use and has higher performance.
It works with a personal computer or PLC to manage torque measurement more highly. For managing manual torque drivers and wrenches.
Color display that can display various information.
Data output is standard equipment for both USB and RS232C.
A series of diverse lineups from up to 500mN・m (0.5N・m) to 1500N・m. Numerical values such as pass / fail conditions can be set up to 10 channels. Pass / fail judgment is clearly displayed in color. Built-in battery drive.

Works with “PC” and “PLC” Manual torque wrench management

Various commands can be input from PLC or personal computer. Finer torque management is possible with external control.

Command list
Clear signal: Clears the display and outputs the held numerical value as data and saves it in memory.
Measurement mode: Change the measurement mode.
Measurement channel: Change individual channels for which conditions such as pass / fail judgment are set.
Peak hold upper limit : Change the pass / fail judgment upper limit of the current channel. Peak hold lower limit: Change the pass / fail judgment lower limit of the current channel. Peak down lower limit: Change the peak down judgment start lower limit of the current channel.
Real-time output lower limit: Changed the output lower limit of real-time output. Auto clear time: Changed the time to automatically clear after the measurement is completed.
Buzzer notification: Changed the buzzer notification method.