description

HI4010-02 is a 100 ppm (mg/L) fluoride standard solution.

This solution is used to calibrate the fluoride solid-state ion selective electrode (ISE). Hanna ISE standards are manufactured with high purity chemicals and bottled in Hanna’s state-of-the-art facility. ISEs require calibration to obtain accurate readings when performing measurement techniques such as direct measurement and incremental methods. Up to two-point calibration is recommended for increased accuracy. Volumetric glassware can be used to dilute the standards to fix the desired concentration of the sample being measured. The ISE calibration solutions and sample solutions must always have the same ionic strength by adding TISAB solution.

HI4010-02

Accuracy @25^oC

100 ± 1 ppm F^–

*ContentTISAB free bag

Specifications

– Plastic bottle mblack.

Using

– Pour enough calibration solution into a clean plastic cup so that the electrode, sensor and electrode junction are completely immersed in the calibration solution.

– Calibrate the electrode according to the electrode or meter's instruction manual.

Methods of preservation

– After use, cover and store at room temperature, away from direct sunlight

– Do not dilute or add any chemicals to the solution.

– Always use fresh solution for each calibration

– ABSOLUTELY do not pour used solution back into the bottle.

Uses

Used to calibrate or check the accuracy of any fluoride electrode/meter at 100 ppm.

*ContentTISAB free bag

Certificate of Analysis (COA)

Have

MSDS

Have

Guarantee

Are not

NAGANO KEIKI

NAGANO KEIKI GC66 Digital Pressure Checker thiết bị kiểm tra áp suất đ...

8.790.000 ₫

See details

Big Daishowa

BIG DAISHOWA BM-2GH/ BM-50GH base master cảm biến bù dao máy công cụ...

7.979.000 ₫

See details

HAIMER Centro Dial 3D Sensor 80.300.00.FHN đồng hồ dò trục XYZ

1 ₫

See details

LINE SEIKI

LINE Seiki CT1-3:10A ( CT1-A series) thiết bị đo chiều dài vải kết nối...

7.790.000 ₫

See details

Fluoride Calibration Solution 100ppm, 500 mL HI4010-02

2.290.000 ₫

description

Viewed products (incorrect query)

NAGANO KEIKI GC66 Digital Pressure Checker thiết bị kiểm tra áp suất đ...

8.790.000 ₫

BIG DAISHOWA BM-2GH/ BM-50GH base master cảm biến bù dao máy công cụ...

7.979.000 ₫

HAIMER Centro Dial 3D Sensor 80.300.00.FHN đồng hồ dò trục XYZ

1 ₫

LINE Seiki CT1-3:10A ( CT1-A series) thiết bị đo chiều dài vải kết nối...

7.790.000 ₫

Warranty, maintenance & repair center

Representative office in Hanoi

HI4010-02
Accuracy @25^oC	100 ± 1 ppm F^– *ContentTISAB free bag
Specifications	– Plastic bottle mblack.
Using	– Pour enough calibration solution into a clean plastic cup so that the electrode, sensor and electrode junction are completely immersed in the calibration solution. – Calibrate the electrode according to the electrode or meter's instruction manual.
Methods of preservation	– After use, cover and store at room temperature, away from direct sunlight – Do not dilute or add any chemicals to the solution. – Always use fresh solution for each calibration – ABSOLUTELY do not pour used solution back into the bottle.
Uses	Used to calibrate or check the accuracy of any fluoride electrode/meter at 100 ppm. *ContentTISAB free bag
Certificate of Analysis (COA)	Have
MSDS	Have
Guarantee	Are not

Fluoride Calibration Solution 100ppm, 500 mL HI4010-02

2.290.000 ₫

description

Viewed products (incorrect query)

NAGANO KEIKI GC66 Digital Pressure Checker thiết bị kiểm tra áp suất đ...

8.790.000 ₫

BIG DAISHOWA BM-2GH/ BM-50GH base master cảm biến bù dao máy công cụ...

7.979.000 ₫

HAIMER Centro Dial 3D Sensor 80.300.00.FHN đồng hồ dò trục XYZ

1 ₫

LINE Seiki CT1-3:10A ( CT1-A series) thiết bị đo chiều dài vải kết nối...

7.790.000 ₫

Tag marker

Ask SEMIKI for a quote